Vibrating Feeder
Application Of Zenith Vibrating Feeder
This feeder is manufactured on the theory of vibration, which is widely used in mining, construction materials, silicate and chemical industry. It can provide ores and rocks within 500mm for the next working procedure.
Operation Principles & Structure Characteristics Of Zenith Vibrating Feeder:
The zenith vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to produce a linear huge power which forces the feeder to vibrate. Through the vibration, the materials will slip and sling on the funnel, moving forward, when the materials pass the screening part, smaller parts will fall down, and avoiding the further crushing, so screening purpose can be reached.
Maintenance and Safety Technology Of Zenith Vibrating Feeder:
Maintain and examine the machine frequently to prolong the service life of the machine, which is an important way to assure normal operation. The customers must notice this.
As to the lubrication, the following points should be pay attention to: Oil applied in this machine should be wartery. The lubricating oil should adapt to the local environment and temperature. Usually 20# is adopted. make sure the level of the oil in the vibrator is higher than the sign. Change the oil every 3-6 months. Clean the oil tank, bearing track and gear surface with gasoline or coal oil before changing.
safe technology: the operator must be trained about safety technology; during operation, no person is allowed stand by the machine. No hand touching, adjusting and checking. the machine should touch the earth. The wire must be reliably insulate and wrapped in snakeskin bags. Check frequently whether the wire is abraded or creepage.
Quick-wear Parts
| Name | Diagram No. | material | Number |
| Spring | K41-1 exit | 60Si2Mn | 9 |
| Bottom backplate | K4103.1-1A | 16Mn | 4 |
| Side backplate | K4113.1-1A | 16Mn | 6 |
| Screen strip | K4103.1-3A | ZGMn13 | 6 |
| Spring (motor bracket) | C53368-2 | 60SiM2Mn | 1 |
The Zenith Vibrating Feeder Specifications:
| Model | Max.Feed Size(mm) | Capacity (t/h) | Power (kw) | Weight (kg) | Size of Funnel (mm) |
| GZD850x3000 | 400 | 80-120 | 7.5 | 3607 | 850x3000 |
| GZD960x3800 | 500 | 120-210 | 11 | 3895 | 1000x3600 |
| GZD1100x4200 | 580 | 200-430 | 15 | 4170 | 1100x4200 |
| GZD1100x4900 | 580 | 280-500 | 15 | 4520 | 4900x1100 |
| GZD1300x4900 | 650 | 450-600 | 22 | 5200 | 4900x1300 |
| GZD1300x6000 | 600 | 400~560 | 22 | 7500 | 6000x1300 |
| GZD1500x6000 | 800 | 460~575 | 30 | 8666 | 6000x1500 |
| GZD1800x6000 | 800 | 600~800 | 37 | 11800 | 6000x1800 |
Note: If there is change of the above vibrating feeder specification, it subjects to the newest products' specifications.